Clausewitz Rules v0.2

Following on from comments on Discord I’ve changed around some of the paragraphs so that it reads easier. I’ve also added in the sections I’ve written this week.

If you have any further suggestions to rule wording, grammar corrections or anything in reference to the rules or their format please let me know by contacting me at clausewitz.tabletop@gmail.com or joining our Discord or WhatsApp chats and letting me know directly.

OUR DISCORD SERVER

OUR WHATSAPP CHAT

OUR TABLETOP SIMULATOR MOD

Advertisements

Rulebook Changes

As I go forwards now with the rules that have been published I will post addendums etc as articles and then produce an updated ruleset at the end of each month with the tweaks from the articles included.

One section that I have found is missing is what to do with hits received against units. Therefore the below section will be added to the rules after the Firing Section of the Rulebook.

————————————————————————————————————————

TAKING HITS
Once it has been determined how many hits a Brigade has received the owning player must then reduce the morale of the Brigade by that value. I.e., a Brigade receives two unsaved hits, therefore their morale will decrease by two. The owning player must also roll two dice, on each roll of 5+ the number of combat dice for that Brigade is reduced by 1. The owning player can decide which of his or her units have been affected, and reduce their combat dice tracker accordingly.

————————————————————————————————————————


Following on from firing, I would also like to make a change to the Skirmishing mechanics. Currently 1 die is used for units that can skirmish, and the unit may also take 5 combat dice.

I would like to change this so that if a unit chooses to fire with skirmish dice and are also firing their combat dice, the unit must reduce the number of combat dice they’re firing by the amount of skirmish dice being used. For example, unit A can use up to 1 skirmish dice per turn, if doing so they must relinquish one of their five combat dice to do so. One dice can then be fired as if skirmishing, firing at its maximum range, while the four combat dice (being reduced by one to accommodate the skirmish dice) can fire as normal.

This will also change the actions around firing, and instead of having separate actions for firing skirmish and combat dice, the action will allow a unit to fire all its small arms taking into account the above.

Therefore the Fire Skirmish Weapons action will be removed, and the wording on the Fire! action will change to:

————————————————————————————————————————

Fire! (Cost: 1 Action Point) offensive/defensive
The Brigade can fire all its available combat dice and skirmish assigned to the front rank of units in the Brigade. If firing skirmish dice, these can be fired at full range as if they were at effective range. For every skirmish dice being fired the combat dice is reduced by one.

————————————————————————————————————————


The section below is an addition to the rulebook section dedicated to unit formations.


————————————————————————————————————————

SHOWING UNIT FORMATIONS
To show a unit formation, the easiest solution is to use a small dice on the rear of the base.

A column formation can be represented by the number 6, square by 4 and line formation can be represented by 3.

————————————————————————————————————————

If you have any further suggestions to rule wording, grammar corrections or anything in reference to the rules or their format please let me know by contacting me at clausewitz.tabletop@gmail.com or joining our Discord or WhatsApp chats and letting me know directly.

OUR DISCORD SERVER

OUR WHATSAPP CHAT

OUR TABLETOP SIMULATOR MOD

Advertisements

A note on Scale

Now that a lot of the rules have been written and I’m working through the faction rules, I thought I would just touch base (see what I did there?) with scales and miniature basing.

As written I initially had the ruleset in mind for 6mm, but there should be no barrier to using a rule set at any miniature scale.

For example our current base size for 6mm is 40mm wide bases (or less if you prefer! – I know some testers have been using 30mm). This base width currently translates nicely into movement (2cm moves for infantry) and musket ranges (4cm long range). SO there should be nothing stopping us from scaling this to other size miniatures. Of course you could still use 40mm base widths for a lot of other miniature wargaming scales – 10mm and less primarily.

All the scales can be used on a 6 foot long table, the only adjustment would be the size of the engagement. For example, 10mm miniatures and below based on 40mm wide bases would be suitable to represent Battalions as part of a Corp+ size game. But perhaps 28mm miniatures on 150mm wide bases could represent companies in a Brigade sized game.

As an idea of scale I’ve suggested base sizes below as a guide, remembering that the base size can be used to determine the majority of move and firing distances (e.g. a march is half a base width, a long range musket shot is one base width and an effective ranged shot is half base width etc).

Alternatively, 28mm on 180mm wide bases would also work well as battalions, with each mini representing 50men. Once a hit is inflicted a mini can be removed to represent the loss in strength. This would only be reasonable for smaller games of between 5-10 battalions each.

How Brigades Work

As part of the recent revision to the rules I’ve gone back and rejigged the unit and Brigade profiles.

HOW IT WORKS

When organising their order of battle each general will either purchase a number of Brigades or (in the case of historic battles) take the number as given on the historic order of battle. The Brigade card will look like this:

Brigade Card Ready for Battle

You would purchase you initial Brigade and in matched play games this costs you a certain amount of points in itself. From that point on you add battalions, squadrons or batteries to then buff those initial statistics. So in the case above, we can see that each Line Regiment added is improving the Morale roll the Brigade would need by a further one, meaning once they’ve all been added and it comes to taking their first morale test in battle the Brigade would need a 5+ to pass. Most factions will either be all foot or all horse, only a few factions had a mixture of both, but these will be published with those factions.

COMMAND
This is the value needed to pass in order for that unit to carry out its actions. Only elite units will alter this in any way, the player must instead use command points from a nearby general to boost these in the turn. For example, the player chooses to activate his general first and uses 3 of his 5 command points to boost the above Brigade to Command 6+ instead of 9+.

MORALE
As in previous iterations of the rules this stat is how confident the Brigade is in battle, the number signified is what would be needed to pass a morale test in game. This number may often be modified by other in game factors such as nearby Cavalry, the formation of the units inside the Brigade and any damage received to the Brigade.

STRENGTH
This is an optional statistic for those wishing to compare their losses in game to that of the actual General who commanded in the field at the time. For each hit received on the Brigade this figure reduces by one and cannot be recovered unlike morale. At the end of the game the general deducts his final strength from his starting strength and multiplies the value by 50 to give an estimate on the number of men killed or wounded. e.g., the British Brigade begins the battle with strength 50, and at the end of the game has been reduced to strength 43, meaning a loss of 7 strength. This converts into 350 men killed or wounded (7 x 50 = 350).

STEADY
Steady represents the first roll of the firing phase for any ranged weapon dice. The player needs to score equal to or higher than this value for the player then to roll successes on their ‘Fire!’ roll.

COMBAT WEAPON
This weapon is the standard weapon of the standard trooper inside that unit.

COMBAT DICE
For a historic engagement combat dice is determined by using the number of men for each unit on the order of battle divided by a factor of 200. In matched play, combat dice are purchased individually each time.

For example an order of battle may show that a unit had 970 men, this figure is divided by 200 and rounded off to give the combat dice (970 / 200 = 4.85 (5 Dice)), or in the case above Brigade would be purchase for 57 Points, then a Regiment of Foot (which includes 1 combat die) is purchased for 43 points, each combat die for that regiment after that initial purchase may cost an additional 2 points, so a regiment of foot with 5 combat dice would cost 51 points (43 + 2 + 2 + 2+ 2).

SKIRMISH WEAPONS
If the unit is able to skirmish the weapon the use in doing so will be shown here. Often this is the same weapon, however in some cases such as some Austrian infantry units, the skirmishers of a unit may have been armed with Rifles instead of Muskets.

SKIRMISH DICE
A unit which has skirmish weapons will be granted 1 Skirmish Dice. One is the limit to Skirmish dice and no additional skirmish dice can be purchased. If the unit can skirmish, the cost of this skirmish dice is included in the unit cost when purchased.

ARTILLERY WEAPONS
This specifies any weapons that the unit uses as artillery.

ARTILLERY DICE
Artillery can be fired as an action. If the Brigade possess any Artillery this is fired in the same way as Combat or Skirmish Dice.

CC V INFANTRY
This denotes the dice roll required to cause a hit on this troop type in melee. Other external factors can also modify these rolls such as terrain.

CC V CAVALRY
This denotes the dice roll required to cause a hit on this troop type in melee. Other external factors can also modify these rolls such as terrain.

SAVE
Some units may have a save stat as part of their attributes, if so once damage has been dealt to the unit roll a D6 for each hit. On a roll of the value or above that damage is ignored. Some terrain such as Woods or Villages also grant saves and are specified in the terrain section of the Rulebook.

SPECIAL RULES
Often units will be added to the Brigade which contain special rules, these will vary from such things as Deployment Marker (granting the player an extra deployment marker in the scouting phase) to Marksmen (re-rolling one Fire! dice per action). What each special rule does can be found in the Rulebook under the special rules section.

OUR DISCORD SERVER

OUR WHATSAPP CHAT

OUR TABLETOP SIMULATOR MOD

Advertisements

French Infantry Units

The infantry was the core of every Napoleonic army and the French army was the largest in the world during these times. Having such a powerful army was necessary for France with enemies such as Prussia and Austria forming part of her land borders. The strength of the French infantry varied during the wars, at the beginning of Napoleon’s reign France had 90 line regiments and 26 light regiments, In 1813-1814 this reached a peak of 137 line and 35 light infantry units. At Waterloo this was reduced to 90 line regiments and only 14 light regiments.

The number of line regiments was almost identical to the number of departments in France (Similar to an English County). In 1790 France had been divided into 83 departments with 4-5 parts to each department. Each of these departments had to supply the army with 4-5 battalions of line Infantry.

The French operated under a levee en masse procedure where everyone of fighting age was signed up for military service to France should they be needed. This meant that Napoleon had a large amount of troops at his disposal should he need them. But these new recruits were very basically trained at the depot before joining their battalions where it was expected that the veterans of the battalion would pass on their knowledge to the newer members. This often meant that the level of training the infantrymen would receive would not be comparable to that of the other countries.

Line and light infantry both performed in similar capacities during the wars, but light infantry were trained more intensively in marksmanship and executing orders at higher speeds than their line counterparts. They also formed the advance guards and scouting parties of an army on the move.

1794 FIRST ORGANISATION OF THE FRENCH ARMY

Aleksandr Averyanov. The Struggle for the Bagration Strongpoint

In 1793-94 the French introduced the change moving their battalions into what would be called demi-brigades which consisted of three battalions of infantry. The second battalion would be made up of seasoned veterans who had already seen service, while the 1st and 3rd battalions would be made up of conscripts  and known as volunteer battalions.

Because of this the French developed the “Column of Attack’ as this required much less training of the conscripts rather than advancing in formed lines.

This structure of Demi-brigades lasted until 1803.

French Infantry 1793-1803

n.b. The maximum number of combat dice any of these units can have is five dice.

Special Rules (Light Infantry Only)

  • Deployment Marker – Units of Light Infantry allow the owning player to use an additional deployment marker in the scouting phase.
  • Skirmishers – Light infantry are able to deploy skirmishing troops in front of the main battle line. When doing so they can only be attacked by cavalry or opposition skirmishers.

1803 SECOND ORGANISATION OF THE FRENCH ARMY

Napoleon reintroduced the term “regiment” as of 1803 and demi-brigade was only used from that point for provisional troops. At this point there were 90 line Infantry battalions of which 19 had four battalions and the remainder had three. Of these battalions one would be the depot battalion and the others would serve in the field. The light infantry had 3 regiments of four battalions and the other 24 had three battalions, once again with one battalion acting as a depot battalion.

1803 ‘war’ battalion

1 grenadier company (80-90 men)
8 fusilier companies (120 men)

Occasionally the Grenadier companies would be detached from their parent battalions and formed into Grenadier battalions or even entire Grenadier divisions.

In 1805 one of the fusilier companies of each battalion was converted into a Voltigeur company and in 1806 before going to war with Prussia the 3rd battalions were dissolved to replenish the 1st and 2nd battalions.

1805-1808 Battalion
1 Grenadier company (80-90 men)
7 Fusilier Companies (120 men)
1 Voltigeur company (120 men)

French Infantry 1805-1808

n.b. The maximum amount of combat dice these units can have is five.

Special Rules

  • Deployment Marker – Units of Light Infantry allow the owning player to use an additional deployment marker in the scouting phase.
  • Skirmishers – French Light and Line Infantry are able to deploy skirmishing troops in front of the main battle line. When doing so they can only be attacked by cavalry or opposition skirmishers.
French Line Infantry

1808 THIRD ORGANISATION OF THE FRENCH ARMY

In 1808 Napoleon ordered the restructure of war battalions from nine companies to six stronger companies. Between 1808 and 1815 a battalion numbered 840 men in strength on paper, in reality a battalion would normally be between four to six hundred men in strength. Marshal Davout was of the opinion that a battalion of anything larger than 960 men was too cumbersome to be managed properly by its commanders.

1808 War Battalion
1 Grenadier company (140 men)
1 Voltigeur company (140 men)
4 Fusilier Companies (140 men each)

This image has an empty alt attribute; its file name is image-9.png
French Infantry 1808-1815

n.b. The maximum number of combat dice these units can have is 4.

Special Rules

  • Deployment Marker – Units of Light Infantry allow the owning player to use an additional deployment marker in the scouting phase.
  • Skirmishers – French Light and Line Infantry are able to deploy skirmishing troops in front of the main battle line. When doing so they can only be attacked by cavalry or opposition skirmishers.

NATIONAL GUARD

Napoleon did not believe that the middle-class National Guard would be able to maintain order and suppress riots. Therefore, he created a Municipal Guard of Paris, a full-time gendarmerie which was strongly militarised. However, he did not abolish the National Guard, but was content to partially disarm it. He kept the force in reserve and mobilised it for the defence of French territory in 1809 and 1814. In Paris during this period the National Guard comprised twelve thousand bourgeois property owners, serving part-time and equipped at their own expense, whose prime function was to guard public buildings on a roster basis. Between 1811 and 1812 the National Guard was organized in “cohorts” to distinguish it from the regular army, and for home defence only. By a skilful appeal to patriotism, and judicious pressure applied through the prefects, it became a useful reservoir of half-trained men for new battalions of the active army.

After the disastrous campaign in Russia in 1812, dozens of National Guard cohorts were called up for field duty the next year; four cohorts being combined to form one line infantry regiment. The 135ème to 156ème Régiments d’Infanterie de Ligne were thus formed. Many of these fought in the campaigns in Germany in 1813 and the invasion of France by allied Austrian, Prussian, Russian and British armies in 1814. Existing National Guard units, such as those of Paris, were deployed as defence corps in their areas of recruitment. Mass conscription was extended to age groups previously exempt from military service, to provide more manpower for the expanded National Guard. Students and volunteers from gamekeepers and other professional groups formed separate units within the National Guard. Clothing and equipment was often in short supply and even the Paris National Guard was obliged to provide pikes as substitute weapons for some of its new recruits. These field and regional units were disbanded in 1814 after the abdication of Napoleon I.

Six thousand national guardsmen took part in the Battle of Paris in 1814. Following the occupation of Paris by the allied armies, the National Guard was expanded to 35,000 men and became the primary force for maintaining order within the city.

French National Guard

n.b. The maximum number of combat dice the national guard can have is five.

IRREGULAR INFANTRY

Chasseurs des Montagnes Uniform

There were several units of irregular infantry.

The chasseurs des montagnes were formed to deal with the Spanish irregulars, bandits and gangs of deserters along the French-Spanish border. They were uniformed in dark brown with sky-blue facings. They earned reputation as excellent guerrilla hunters and eradicators, specializing in swift cross-country movements. However, this unit was weak and had only 3 battalions of light infantry. Although these battalions were made of regular troopers their replacements were apprehended efractaires from the Pyrenees departments, who returned to duty under the pledge that they would serve only on the Spanish frontier. In 1814 the chasseurs des montagnes were disbanded and transferred to line and light regiments.

the miquelets francais was another unit formed on the Spanish border during 1792-94 and 1808-09.. It was an old French custom to recruit independent companies of Basques and smugglers for partisan mountain warfare. Moncey and Perignon commanded such units early in the Revolution. For many Frenchmen the Basques’ features suggested extreme ferocity. These irregulars were armed with very long-barrelled muskets with a set-trigger and pistols.

In 1815 Napoleon formed Chasseurs des Pyrenees to guard the Spanish frontier. Napoleon wanted nine battalions but the time was short and only seven and half were formed.

The Chasseurs des Alpes were formed in 1813 in preparation for an Austrian offensive in Italy and for fighting the Piedmontese Barbets. It had 1-2 battalions formed of former smugglers, poachers, gamekeepers and ordinary mountaineers. In 1814 the Bourbons disbanded this unit. In 1815 Napoleon formed 2 battalions.

The Chasseurs de la Reunion were formed as part of the garrison of the Isle de France (Mauritius). It was an all-black formation.

The cipayes (sepoys) were made of natives in India. There were only few companies and they were disbanded in 1803 when the small French colonies in India were lost to the British in 1803.

French Irregular Infantry

Special Rules

  • Deployment Marker – Units of Light Infantry allow the owning player to use an additional deployment marker in the scouting phase.
  • Skirmishers – French Light and Line Infantry are able to deploy skirmishing troops in front of the main battle line. When doing so they can only be attacked by cavalry or opposition skirmishers.
  • Guerilla’s – Infantry of this type can move through Difficult terrain as though it was open ground and move through impassable terrain at movement of 2cm.

I hope you enjoyed this article, if you have any suggestions for improvement or you’d like to submit your results of playtesting please email me on Clausewitz.Tabletop@gmail.com

OUR DISCORD SERVER

OUR WHATSAPP CHAT

OUR TABLETOP SIMULATOR MOD

Advertisements

Clausewitz Full Alpha Ruleset

The following is a full list of the Alpha rules. Please take your time to read through them or download the Word Document attached. I’m looking for feedback on everything from spelling, wording and location of paragraphs to feedback on rules etc. No opinion is a bad opinion and please be as thorough as you can! All people who provide feedback will be mentioned in the rulebook upon its release as a thank you. The word document attached has track changes on so please feel free to make as many changes as you like and send the document to clausewitz.tabletop@gmail.com

The rules below have been adjusted and all articles on the nations will be revisited to update the rules for the individual units.

Again, thank you to everyone who has helped me get this far with the rules but especially to Chris Pringle and Lehann who gave many a thoughtful idea or suggestion on the way!

————————————————————————————————————————

THE SCALE
Clausewitz has been designed for 6mm wargaming at a scale of 1:5300, which roughly equates to one 6mm figure representing 50 men. One foot equates to one mile.

There is nothing to stop players using other scales however, please see the section on ‘Other Miniature Scales’.

THE FIGURES AND BASING
Basing for the scale mentioned above is 40mm wide and 30mm deep, these apply to all types of units apart from Aide-de-camp (ADC’s) which can be represented on any small round base as a single mounted miniature.

Unit bases have two dice holders on each base at the back which represent the formation that Unit is in and the number of combat dice the Unit possess. Alternatively, these can be tracked using pen and paper.

Command bases are the same size as Unit bases with dice holders to represent the Brigades Actions, Morale and Strength.

ADC’s are a single miniature on a round base with a single dice holder representing an objective target (more on this later).

Each base represents a unit, this may be a Battalion (Infantry), Squadron (Cavalry) or Company (Artillery). These bases are grouped together into Brigades which are the main elements of any game. Bases inside a Brigade act together simultaneously.

THE BATTLEFIELD
A game of Clausewitz can be played on any size playing area but 6’x4′ is ideal for representing the larger battles of the time.

TERRAIN
There are various types of terrain that affect gameplay and are fall under different categories:

Open
This represents your standard rolling countryside and fields. Open has no effect on the outcome of the battle. Quick March can only be used on open terrain.

Units moving along roads can take advantage of a +1cm addition to their movement speed.

Rough
Rough ground can be anything from scrubland to ploughed fields. Units passing through rough terrain are unable to use Quick March.

Difficult
Units moving through difficult terrain halve their movement speed (rounded up) as they make certain of their footing.

Impassable
Only units with the special rule El Bruc may move through, down or up impassable terrain at a rate of 1cm per action. If this unit is inside a Brigade with other units that do not possess this special rule then the Brigade cannot take advantage of this rule.

Impassable terrain may be such areas like ravines or cliffs.

A section on terrain types is included towards the back of the rules with the different effects each terrain type has on play and their classification. For example, troops inside of woods receive a 6+ saving throw. Troops uphill in a melee to their enemy will receive a +1 to their combat dice roll.

BRIGADES
A Brigade is made up of a number of bases known as “Units” which represent Battalions, Cavalry or Artillery companies, or even a combination of all three in some instances. Each Unit will add its own attributes to that of the Brigade. As well as the Units mentioned above, there will also be a Brigadier General base (same base dimensions) who represents the Brigade command.

Each Brigade is made up of basic attributes which are enhanced by the units that are included within that Brigade. Brigades can be no larger than five troop bases and one command base. These attributes are:

Command: 8+
Before any actions are carried out by a Brigade, they must pass a command test. This must be a D6 roll higher than that specified on their Brigade card. This roll can be modified by nearby Generals who can add some of their command bonus to the roll to help the unit pass. If that unit fails its roll it cannot act that turn.

Morale 8+
Morale is used once the unit is within the Zone of Control of any enemy units. This will be modified by formations of units within the Brigade and also by the number of units inside the Brigade. Each Unit stand (not command stand) will add +1 to this roll. A Brigade cannot increase this beyond 3+ and a roll of 2 in 2D6 is always a failure.

Strength: 0
Strength is an optional attribute which the player can use to determine how many loss’s their army or Brigades suffered at the end of the battle. For every 50 men added to the Brigade increase this attribute by 1.

Steady 5+
This is the roll needed for the men in the Brigade to reload their weapons effectively under the gaze of the enemy and pluck up their courage to shoot at the men opposite them. Rolls which are successful can be rolled again in the ‘Fire!’ step of shooting. A ‘Fire!’ roll sees whether the Brigade hits its target, needing 4+ at effective range and 5+ at long range. Some elite units may boost this roll to a 4+ or perhaps grant re-rolls to a portion of the dice.

Combat Dice: 0
This is the number of dice the Brigade can use when it’s firing its weapons at the enemy or taking part in a melee action. As units are added to the Brigade the number of Combat Dice will increase in proportion with the size of the unit that is being added. A dice is added for every 200 men of a unit. When a Brigade takes any damage, for each damage roll a die on 5+ their Combat Dice pool is reduced by 1.

Skirmish Dice: 0
The number of skirmish dice assigned to the Brigade is determined by the number of light infantry units inside the Brigade and the number of other units with the Skirmishers special rule. For each 1000 men (rounded up) of a light infantry or unit with the Skirmishers special Rule, add 1 skirmish die. Skirmish dice are explained in greater detail later on in these rules.

Artillery Dice: 0
Each time Artillery units are assigned to the Brigade the Artillery dice pool is increased by one for each artillery piece that is added.

CC v Foot: 5+
This is the basic melee stat for all Brigades. When a Brigade meets an opposing foot unit in base-to-base contact on terrain that isn’t open, those Brigades will fight a melee action. Using their combat dice, rolls of equal or higher the value specified will result in a hit against the opposing Brigade.

CC v Mounted: 6+
This is the basic melee stat for all Brigades. When a Brigade meets an opposing mounted unit in base-to-base contact on terrain that isn’t open, those Brigades will fight a melee action. Using their combat dice, rolls of equal or higher the value specified will result in a hit against the opposing Brigade.

UNIT FORMATIONS
Foot units inside a Brigade can take on different formations depending on the situation they find themselves in. To change the formation for any units within the Brigade, the Brigade must use an action to change unit formations for one action point. The formations available to foot troops are:

Line Formation
The line formation allows the unit to fire all available combat dice assigned to it. Fire from artillery is less effective from the front and only causes half damage (half the damage from all incoming artillery fire and round up). Artillery fire directly into the flank of a line unit would cause double damage. (double all damage from incoming artillery fire). Units in line formation cannot use its quick march speed.

Column Formation
Any units that are in column formation grant the Brigade an additional one to its morale (remember that the Brigade morale cannot exceed 3+). Units in column formation can use the quick march pace. Columns are vulnerable to Artillery fire and so receive double damage from all incoming artillery attacks. Cavalry pose less of threat to units in column formation and therefore cannot charge them, the Cavalry special rule is reduced by one for Brigades that have their units in Columns (i.e., Cavalry (-2) is reduced to Cavalry (-1) and Cavalry (-1) is negated).

Square Formation
Used solely as a defensive formation any units in Square cannot move, and suffer double damage from artillery attacks. Cavalry cannot charge units in Square formation and their Cavalry special rule does not affect units in Square.

PLAY METHODS
Clausewitz can be used to either re-fight historical engagements where players can build an army using the order of battle at the time, or, as a points-based game where players build armies of equal value.

THE TURN

There are 30 turns to a game of Clausewitz, this represents 5 hours of battle. Players may wish to add more turns if they’re refiguring a historic engagement.

Each turn represents 10 minutes real time of battle, for example Turn 1 may represent the battle time between 9:50am and 10am.

OBJECTIVES
Each game will have a number of objectives on the battlefield which players will score points for holding. Objectives are numbered, and Brigades are given orders to hold these objectives. Brigades can only score victory points for their player if the Brigade has been designated to hold that objective by an ADC. At the end of each turn points are counted up and added to a running total.

GENERALS
Each player will be represented by a single base on the tabletop representing them as Commander-in-Chief (CinC). Players can move their commanders around the field of battle to issue orders to their Generals of Division (GD) or to their Brigadier Generals (BG) if playing in a smaller game.

The CinC can issue ADC’s to send orders to a General of Division or Brigade, when they do so an ADC base leaves the CinC with a dice representing the number of the objective that the Brigade can attack. A CinC can only issue one ADC per turn.

An ADC must first make base to base contact with the General of Division for that Brigade however (chain of command and all that). Once they have made contact the ADC can continue o. To the Brigade.

Generals of Division and the Commander-in-Chief all have 5 command points they can spend each turn if they’re withing a certain distance if any friendly Units. Command points can be used to buff a Brigades command stat to make it easier for them to enact orders that turn.

If Generals are in base-to-base contact with a friendly unit in melee with the enemy the General can also take part and adds one additional combat dice to the friendly Brigade in combat. This dice is the equivalent of the Generals personal guard, as elite fighters these will hit on 4’s in melee.

SCOUTING PHASE
Before deploying their unit’s players will enter a mini-game to determine their deployment areas. Each general will have a number of Deployment Markers which represent the number of Light Infantry or Light Cavalry in their army.

These Markers move at a rate of 15cm. The generals move these Markers across the table in alternate turns. Each marker must be within either 15cm of a board edge or another friendly marker. If at any point a marker moves to within 15cm of any of the opponent’s markers both their marker and their opponents are locked into position and cannot move any further. Once all markers are ‘locked’ the area those markers enclose represent the players deployment area. Players then place their units in the table alternately beginning with the player who locked all their markers first.

PLAYING THE GAME
There are no phases in Clausewitz, instead at the beginning of a game each player has a single-coloured die or chip which they place inside a bag. Shake the bag and draw, whoever’s die or chip is drawn may act with their CinC first. The CinC may either move 30cm OR issue an ADC to a Brigade.

Once the ADC reaches a General of Division or Brigade and has given them their objective that General or Brigade is considered to be ‘activated’.

Once a Brigade or General has been activated an additional chip or die for that player can be added to the draw bag for the next turn. When that player draws their chip the next turn, they can then choose which of their activated elements to use.

ACTIVATED ELEMENTS
Each element can use up to five actions per turn, some actions cost more than others a list of actions is shown later on.

Actions usually revolve around moving, changing formation or attacking the enemy.

REACTIONS
Elements may choose to reserve some of their actions as reactions. Reactions enable you to respond to enemies within 10cm of your elements, this distance is known as the ‘Zone of Control’. Therefore, if you have activated a unit and are perhaps 15-20cm away from the enemy it may be wise to reserve some of your actions as reactions so that you can repulse the enemy of they attack.

If you’re outside of the zone of control of an enemy and you’re moving a unit that will end all its actions without entering an enemies Zone of Control you can choose to use all your actions at once to speed up play. For example, moving your infantry 10cm instead of 2cm per action.

ZONE OF CONTROL
Once opposing elements close to within 10cm they have entered the zone of control. From this point forward these elements can only move directly towards or directly away from the enemy in their ZoC.

Actions within a ZoC must be taken one at a time and must be preceded by a morale check for the unit performing the action. If they fail their morale check then depending on how badly that unit has failed by will determine how the unit reacts.

If the element passes its morale check it may use an action as normal and the enemy must then make a morale test to perform a defensive reaction. If either element fails their morale test by a value of 2 or less, that element will withdraw directly away from the enemy at its standard move rate (while keeping its front towards the enemy), this is known as a withdrawal, it may not make any more actions that turn aside from defensive fire or withdrawals as reactions. If an element fails by a value of more than 2 then that element flees using the move distance it has available from its remaining actions (i.e., the element has four actions remaining, it will make four move actions ending with the element facing away from the enemy and the element may not use perform any other actions or reactions that turn and must pass a morale test the next turn to move as normal. If it fails this test then it will flee a further 5 actions.

ACTIONS & REACTIONS

Order (Cost: 1 Action Point)
A general can issue an order once per turn to a subcommander (this may be a General of Division in the case of the Commander-in-Chief or a Brigade in the case of the General of Division). When doing so, an ADC is placed in base-to-base contact with the command stand issuing the order, it may then move 30cm towards its intended target regardless of terrain.

March (Cost: 1 Action Point) Offensive/Defensive
The entire Brigade may make a move at the speed of its slowest Unit on the March. The defensive version moves the Brigade away from the enemy. Units cannot use Reactions to advance.

Quick March (Cost: 1 Action Point)
The entire Brigade may make a move at the slowest of its Unit on the Quick March. This cannot be used inside the Zone of Control of an enemy unit.

Change Unit Formations (Cost: 1 Action Point)
Any Units within the Brigade can change their formation is they are able to do so. Formations can either be Line, Square, Column or Skirmish.

Change Brigade Formation (Cost: 3 Action Points)
The entire Brigade can change its formation to having either 4, 3, 2 or 1 wide in units. Cannot be performed in a Zone of Control of the enemy.

Fire Skirmish Weapons (Cost: 1 Action Point)
A unit that has skirmish dice under its attributes can fire these at the enemy if it wishes. If it does so, the weapons can fire at long range as though they were inside effective range (hitting on 4+ instead of 6+ on their Fire! roll). This represents the skirmishers moving ahead of the main body of troops and firing on the enemy as they approach. The process for firing skirmish dice is the same as firing the weapons of the rest of the Brigade.

Fire! (Cost: 1 Action Point) offensive/defensive
The Brigade can fire all its available combat dice assigned to the front rank of units in the Brigade.

Bombard (Cost: 1 Action Point) offensive/defensive
The Brigade can fire all its available artillery dice assigned to the Brigade. If an enemy is within the Brigades Zone of Control that enemy must be the target.

Hold! (Cost: 0 Action Points) offensive/defensive
The Brigade holds position waiting for the enemy to move closer. If the enemy brigade is within weapon range the Brigade must pass a command test, if it fails to do so the Brigade will fire all its weapons at the closest enemy within range.

MOVEMENT
When using a march action foot troops can move 2cm per action, if using a quick march action, they can move 3cm.

Mounted troops move at a rate of 4cm on the march per action and 8cm at quick march.

ADVANCED RULES

Capturing Generals
Players whose Brigades move over or finish their move on top of an enemy general are considered to have captured that General. He must stay in base-to-base contact with that Brigade until a friendly Brigade defeats them in combat or the end of the game. An extra victory point is awarded per General captured or killed.

Capturing Enemy Colours
A Brigade can capture the colours of enemy units it defeats in melee on a roll of a 6. An extra victory point is awarded per colour captured.

Using Strength
If players wish and they agree between themselves, they can use the strength stat on the Brigades, this will need tracking throughout the game.  At the end of the game subtract your ending strength of all your units against what you began with. The difference between these two figures is the number of loss’s your army has suffered. Multiply the value by 50 to give you a rough estimate of how many men were killed or wounded during the engagement. This works best for replicating historical battles and comparing your results to that of the General who commanded the army at the time.

FIRING
Any type of firing is broken down into two steps.

1st Step: Steady!
Each Brigade is given a ‘Steady’ stat, this represents how nervous the men are in battle and how likely they’re to load and fire their weapons correctly. This is usually a roll of 5+.

2nd Step: Fire!
Successful ‘Steady!’ rolls then go on to make their ‘Fire!’ roll which at the effective range of the weapon is 4+ while long range is 6+. Any success from this count as hits on the enemy, if the enemy is allowed to make saving throws, they would do so once hits have been allocated to their Brigades.

TERRAIN TYPES

Woods Difficult Terrain, units inside woods receive a saving throw of 5+ from any type of weapons fire.

Ploughed FieldsRough Terrain

Villages/TownsDifficult Terrain, units inside villages or towns are considered to be imbedded inside the buildings etc and therefore receive a saving throw of 4+. Other units can attack units embedded in Villages or Towns in melee but the defender receives +1 to their combat dice.

CliffsImpassable Terrain

RavinesImpassable Terrain

LakesImpassable Terrain

RiversDifficult Terrain

Gentle HillsOpen Terrain, however units in melee in a lower position on the hill than their target suffer -1 to their combat dice rolls.

Steep HillsRough Terrain, units in melee in a lower position on the hill than their target suffer -2 to their combat dice rolls (rolls of 6 will always hit).

MarshDifficult Terrain

WEAPONS (these will be superseded by the Nations Army Lists once fully written)

Pistols
Effective Range: 1cm
Long Range: 2cm

Muskets
Effective Range: 2cm
Long Range: 4cm

Rifles
Effective Range: 4cm
Long Range: 8cm

6 Pounder Cannon
Effective Range: 10cm
Long Range: 15cm

12 Pounder Cannon
Effective Range: 12cm
Long Range: 20cm

Howitzers
Effective Range: 15cm
Long Range: 25cm

BASIC UNITS ARMY LIST (these will be superseded by the Nations Army Lists once fully written)

LINE INFANTRY           
Command: No effect
Type: Foot
Morale: +1 per unit added
Strength: +1 per 50 men added
Steady: No effect
Combat Dice: +1 per 200 men added
Skirmish Dice: +1 per 1000 men added
Artillery Dice: No effect
CC v Foot: No effect
CC v Mounted: No effect
Additional Rules: None

LIGHT INFANTRY
Command: No effect
Type: Foot
Morale: +1 per unit added
Strength: +1 per 50 men added
Steady: No effect
Combat Dice: +1 per 200 men added
Skirmish Dice: +1 per 1000 men added
Artillery Dice: No effect
CC v Foot: No effect
CC v Mounted: No effect
Additional Rules:
‘Deployment Marker’ – adds a deployment marker for the player to use in the scouting phase of the game.

HEAVY CAVALRY
Command: No effect
Type: Mounted
Morale: +1 per unit added
Strength: +1 per 50 men added
Steady: No effect
Combat Dice: +1 per 50 men added
Skirmish Dice: No effect
Artillery Dice: No effect
CC v Foot: No effect
CC v Mounted: No effect
Additional Rules:
‘Cavalry (-2)’ – All enemy foot units within 10cm suffer a -2 modifier on their morale test rolls.

LINE CAVALRY
Command: No effect
Type: Mounted
Morale: +1 per unit added
Strength: +1 per 50 men added
Steady: No effect
Combat Dice: +1 per 50 men added
Skirmish Dice: No effect
Artillery Dice: No effect
CC v Foot: No effect
CC v Mounted: No effect
Additional Rules:
‘Cavalry (-1)’ – All enemy foot units within 10cm suffer a -1 modifier on their morale test rolls.

LIGHT CAVALRY
Command: +1 per unit added
Type: Mounted
Morale: +1 per unit added
Strength: +1 per 50 men added
Steady: No effect
Combat Dice: +1 per 50 men added
Skirmish Dice: No effect
Artillery Dice: No effect
CC v Foot: No effect
CC v Mounted: No effect
Additional Rules:
‘Cavalry (-1)’ – All enemy foot units within 10cm suffer a -1 modifier on their morale test rolls.
‘Deployment Marker’ – adds a deployment marker for the player to use in the scouting phase of the game.

FOOT ARTILLERY
Command: No effect
Type: Foot
Morale: +1 per unit added
Strength: +1 per 50 men added
Steady: No effect
Combat Dice: No effect
Skirmish Dice: No effect
Artillery Dice: +1 per weapon
CC v Foot: No effect
CC v Mounted: No effect
Additional Rules:
‘Artillery’ – In Melee this unit halves the number of combat dice it may use.

HORSE ARTILLERY
Command: No effect
Type: Mounted
Morale: +1 per unit added
Strength: +1 per 50 men added
Steady: No effect
Combat Dice: No effect
Skirmish Dice: No effect
Artillery Dice: +1 per weapon
CC v Foot: No effect
CC v Mounted: No effect
Additional Rules:
‘Artillery’ – In Melee this unit halves the number of combat dice it may use.

OUR DISCORD SERVER

OUR WHATSAPP CHAT

OUR TABLETOP SIMULATOR MOD

Advertisements